Jual Analog Oscilloscope 20Mhz ATTEN AT7328

Deskripsi Singkat :

Jual Oscilloscope Analog ATTEN harga murah, Hub : 089617332462

Kategori :

OscilloscopeTest & Measurement

Bagikan ke :

Features
• CRT with Bright high accelerated pole voltage  • This oscilloscope tube is of fast speed and high light.Votlage of accelerated pole up to 2kv,able to indicate clear traceseven under  • High-speed sweep.  • Two waveforms in different frequency can be observed via alternative trigger function.  • TV signal synchronous function  • Ch1 output  • Z-axis input      Function of bright adjustable can add frequency or time marker to oscilloscope,trace of positive signal blanking,TTLmatching.  • X-Y operation      This item can be used as an X-Y oscilloscope while setting in X-Y position,CH1 is horizontal axial and CH2 is vertical axial.
Specifications
1) Vertical System Sensitivity 5mV~5V/div,10 steps in 1-2-5 sequence Sensitivity Accuracy ≤3%(x5 MAG: ≤5%) Vernier vertical Sensitivity To 1/2.5 or less of panel-indicated value Frequency Bandwidth DC~20MHz(x5 MAG:DC~7MHz) AC Coupling:<10hz br="">Rise Time Approx:17.5ns(x5 MAG:50ns) Input Impedance Approx:1MΩ/25pF Square wave Overshoot: ≤5%(At 10mV/div range) Charecteristics Other distortions and other ranges:5% added to the above value. DC Balance Shift 5mV~5V/div:±0.5DIV, 1mV~2Mv/DIV ±2.0DIV Linearity <±0.1DIV of amplitude change when waveform of 2DIV at graticule center is moved vertically. Vertical system: CH1: Channel 1        CH2: Channel2        DUAL: Channel 1 and Channel 2        ADD: Addition of Channel 1 and Channel 2 Chopping repetition Frequency Approx.. 250KHz Input Coupling AC , GND , DC Max Input Voltage 300Vp-p CMRR >50: 1(@50KHz sine wave) Isolation between channels(At 5mv/DIV range) >1000: 1 at 50kHz ; >30: 1 at 20MHz 2) Vertical System CH1 Signal Output Min. 20mV/DC (50Ω output bandwidth 50Hz~5MHz) CH2 INV BAL Balance variance ratio≤1DIV 3) Triggering Triggering Soure CH1, CH2, LINE, EXT Coupling AC: 2MHz~20MHz: 1.5DIV Slope: +/- 4) Horizontal System Trigger signal Input Impedance Max Input Voltage: Approx 1MΩ/25pF 300V(DC+AC peak)AC not exceed 1KHz Sweep time: 0.2uSec 0.5Sec/DIV, 20 steps in 1-2-5 sepuence Sweep time: Accuracy ±3% Vernier sweep time control: ≤1/2.5 of panel-indicated value Sweep magnification: 10 times x10MAG Sweep time accuracy: ±5%, (20nSec~50nSec are uncalibrated) Linearity ±3%, x10MAG: ±5%(20ns and 50ns are uncalibrated) Position by x10MAG Within 2DIV. at CRT screen center 5) X-Y Mode Sensibility Same as Vertical axis BandwidthDC~500KHz X-Y Phase difference=3(within DC50kHz) 6) Z Axis Sensibility: 5Vp-p Bandwidth: DC~2MHz Input impedance: Apporx. 47kΩ Max input voltage: 30V 7) Calibration Signal Waveform: Squaer wave Frequency: Approx 1KHz Duty Ratio: 48: 52 Output voltage 2Vp-p±2% Output impedance: Approx 1kΩ 8) CRT Type 6in, Rectangle, Inside graduaton Phosphor P31 Acceleration Voltage Approx 2kV 200MHz Effective Screen Size 8x10DIV(1 DIV=10mm(0.39in)) Graticule Internal Trace rotation provided 9) Power requirement Voltage: Fixed AC220V±10% or 110/220V±10% selectable Frequency:50/60Hz Power conseumption: Approx.40VA,35W(max) 10) Operating Ambient Indoor,2000m elevation Ambient temperature:10°C~35°C Max operating range:0°C~40°C Humidity:85% RH ,dry Size:310x150x455(mm) Weight:approx.8Kg Storage temperature:-10°C~70°C

ORDER SEKARANG :

---

Untuk Pembelian dalam jumlah Banyak, Silakan Kontak Customer Service Kami untuk mendapatkan harga terbaik

Order

HOTLINE Hubungi Kami di Contact

PENGIRIMAN dengan Kurir Terpercaya

Produk : Jual Analog Oscilloscope 20Mhz ATTEN AT7328
Kategori : Oscilloscope, Test & Measurement
Harga : Order via SMS / WhatsApp: 0813 1980 1247 dengan format:

Nama/Nama Produk/jumlah/alamat/kota

Contohnya seperti ini :

Upin / Jual Analog Oscilloscope 20Mhz ATTEN AT7328 / 3pcs / Jl. Wijaya 39A, Sidalaya / Tasikmalaya

Format order tidak harus sama, yang penting bisa kami pahami. Secepatnya Kami akan melakukan konfirmasi melalui SMS ke no Hp Anda, setelah Order Kami terima. X

Produk Terkait :