Jual Digital Oscilloscopes Atten ADS1042CML

Deskripsi Singkat :

Jual Digital Oscilloscope ATTEN harga murah, Hub : 089617332462

Kategori :

Oscilloscope Test & Measurement

Bagikan ke :

ATTEN ADS1042CML Digital Storage Oscilloscope Features

1 GSa/s sampling rate and 50 GSa/s equivalent sampling rate
2 Channels
7" Color LCD
12 menu languages - English, French, German, Russian, Spanish, Simplified Chinese, Traditional Chinese, Portuguese, Japanese, Korean, Italian, Arabic
Memory Depth: 2Mpts
Trigger types: Edge, Pulse Width, Video, Slope, Alternative
Unique digital filter function and waveform recorder function
Support Pass/Fail function.
Thirty two parameters Auto measure function.
Save/recall types: setups, waveforms, CSV file, picture
Support Multilingual On-line help system
Adjustable waveform intensity and grid brightness
Easyscope Software
Standard Configuration Port:
- USB Host: Support USB flash driver save/recall function and update firmware;
- USB Device: Support PictBridge compatible printer and support PC remote control;
- RS232, Pass/ Fail output.

ATTEN ADS1000CML/CL+ Digital Storage Oscilloscope Series Comparative Specifications

Model	ADS1022CL+	ADS1042CML	ADS1062CML	ADS1102CML	ADS1152CML	ADS1202CML
Bandwidth	25 MHz	40 MHz	60 MHz	100 MHz	150 MHz	200 MHz
Sampling rate	500 MSa/s	1 GSa/s
Equivalent sampling rate	10 GSa/s	50 GSa/s
Memory depth	32 Kpts	2 Mpts (one channel), 1 Mpts (two channels)				5 Kpts
Rise time	< 14 ns	< 8.8 ns	< 5.8 ns	< 3.5 ns	< 2.3 ns	< 1.8 ns
Input impedance	1 MΩ \|\| 14 pF
Sec/div range	25 ns/div to 50 s/div	10 ns/div to 50 s/div	5 ns/div to 50 s/div	2.5 ns/div to 50 s/div
Sec/div range	scan: 100 ms -50 s/div
Display	Color LCD, (480 × 234) 7″

ATTEN ADS1042CML Digital Storage Oscilloscope Technical Specifications

Input
Input coupling	AC, DC, GND
Input impedance	DC: 1 MΩ ± 2% \|\| 17 pF ± 3 pF AC: 1.2 MΩ ± 2% \|\| 17 pF ± 3 pF, < =100 mV/div 1.0 MΩ ± 2% \|\| 17 pF ± 3 pF, >100 mV/div
Maximum input voltage	± 400 V PK-PK CATI
Probe attenuator	1×, 10×
Oscilloscope attenuator	1×, 10×, 100×, 1000×
Horizontal system
Real time sampling rate	1 Ch: 500 MSa/s, 2 Ch: 250 MSa/s (for ADS1000CL+ models)	1 Ch: 1 GSa/s, 2 Ch: 500 MSa/s (for ADS1000CML models)	1 Ch: 1 GSa/s, 2 Ch: 1 GSa/s (for ADS1202CML models)
Equivalent sampling rate	50 GSa/s
Measure display modes	main, window, window zoom, scan, x-y
Timebase accuracy	±100 ppm measured over 10 ms interval
Time window	18 div
Vertical system
Vertical sensitivity	2 mV-10 V/div at input BNC (1-2-5 order) 2 mV-5 V/div at input BNC (for ADS1202CML and ADS1000CL+ models)
Channel voltage offset range	2 mV-200 mV: ±1.6 V 206 mV-10 V: ± 40 V in fixed gain ranges & variable gain ranges
Vertical resolution	8 bit
Channels	2
BW flatness	DC-10% of rated BW: ± 1dB 10%-50% of rated BW: ± 2 dB 50%-100% of rated BW: ± 3dB
Lower frequency limit (AC -3 dB)	≤10 Hz (at input BNC)
Noise: Pk-Pk for 3K record	≤ 0.6 div for average of 10 Pk-Pk readings in fixed gain settings. ≤ 0.7 div for average of 10 Pk-Pk readings in variable gain settings
SFDR including harmonics	≥40 dB
DC gain accuracy	< ± 3.0%: 5 mV/div to 5 V/div in fixed gain ranges < ± 4.0%: typical for 2 mV/div and variable gain ranges
DC measurement accuracy: all gain settings ≤100 mV/div	± [3%X (\|reading\|+\|offset\|) +1% of \|offset\| +0.2 div +2 mV] +0.2 div+2 mV]
DC measurement accuracy: all gain settings >100 mV/div	± [3%X (\|reading\|+\|offset\|) +1% of \|offset\| +0.2 div+100 mV]
Math operation	+,-, *,FFT
FFT	window mode: Hanning, Hamming, Blackman, Rectangular
Bandwidth limiter	20 MHz ± 40% typical (note: BW limited below 20 MHz ± 40% when using probe X1)
Trigger system
Trigger types	edge, pulse width, video, slope, alternative
Trigger modes	auto, normal, single
Trigger sources	Ch1-2, EXT, EXT/5, AC Line
Trigger coupling	AC, DC, LF rej, HF rej
Trigger level range	CH1, CH2: ± 6 div from center of screen EXT: ±1.2 V EXT/5: ± 6 V
Trigger level accuracy (typical) applicable for the signal of rising and falling time ≥ 20 ns	internal: ±(0.2 div×V/div)( within ± 4 div from center of screen) EXT: ±(6% of setting + 40 mV) EXT/5: ±(6% of setting + 200 mV)
Edge trigger	edge type: rising, falling, rising and falling
Pulse width trigger	trigger modes: (>,<,=) positive pulse width, (>,<,=) negative pulse width pulse width range: 20 ns-10 s
Video trigger	support signal formats: PAL/SECAM, NTSC trigger condition: odd field, even field, all lines, line Num
Slope trigger	(>,<,=) positive slope, (>,<,=) negative slope time:: 20 ns-10 s
Alternative trigger	CH1 trigger type: edge, pulse, video, slope CH2 trigger type: edge, pulse, video, slope
Control panel function
Auto set	auto adjusting of the vertical, horizontal system and trigger position
Save/recall	support 2 group referenced waveforms, 20 group setups, 20 group captured waveforms internal storage/recall function and USB flash driver storage function.
Acquisition system
Sample type	real time, equivalent time
Sample mode	sample, peak measure, average
Averages	4, 16, 32, 64, 128, 256
Measure system
Auto measurements	Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean, Crms, Vrms, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Rise time, Fall time, Freq, Period, +Wid, -Wid, +Dut, -Dut, Bwid, Phase, FRR, FRF, FFR, FFF,LRR,LRF, LFR, LFF
Cursor measurements	manual mode, track mode and auto mode
Display
Display mode	color TFT 7" diagonal
Resolution	480 × 234 pixels
Wave display mode	point, vector
Point, vector	off, 1 sec, 2 sec, 5 sec, infinite
Menu display	2 s, 5 s, 10 s, 20 s, infinite
Screen saver	1 min, 2 min, 5 min, 10 min,15 min, 30 min, 1 hour, 2 hours, 5 hours, off
Waveform interpolation	Sin(x)/x, linear
Color model	normal, invert
Interface	USB host, USB device, RS232, pass/fail output
Power supply
Input voltage	100-240 V AC, CAT II, auto selection
Frequency scope	45 Hz to 440 Hz
Power	50 V·A
General characteristics
Dimensions (L × W × H), mm	399 × 148.5 × 110.5
Weight, kg	2.4